Removing the rust before painting metal

To paint the metal must first be processed rust appeared on it. To do this is not difficult.

You will need:
1. Wire brush.
2. Means: "Rust Fighter" and "rust converter".
3. anticorrosive composition, varnish and paint.

Process:
1. Slight traces of rust, remove the brush and then apply anticorrosive paint.
2. If the metal heavily eaten by rust, there are two possibilities:
a) impose on the metal "fighter rust." By breeding rust he briefly protect the surface before applying the paint on it with corrosion inhibitor, and at the same time, improve the adhesion of paint to the metal.
b) treat the rust so-called "rust converter". Apply it with a brush or a small bottle of nabryznite on cleansed brush land. The composition of interacting with the rust, turns it into a solid layer of black: a new connection takes the paint and prevents rust to spread.
3. Small metal parts and products can be cleaned of rust washing in the bath with an anticorrosive composition, and then clean with a wire brush. To again rusted parts - cover them with clear anti-corrosion paint.