How to put the tiles on the floor right

Deciding to use ceramic tiles on the kitchen floor or on the floor in the bathroom or toilet, you make the right choice, because it's really durable and reliable option. And if you still do not have experience, we suggest you learn from this article on how to put the tiles on the floor correctly. For this we consider the whole process step by step.

Step One: gruntuem

Before you start packing, we see that there is no need for additional sanding or screeds, which means that the floor must be clean and dry and perfectly smooth.

In the event that the audit was successful, start waterproofing and priming. First, gruntuem floor, then applied waterproofing, than when it should have several layers. First applied to the first, but after a while, when it dries, the second. After hours, you can start laying the tiles.

Step two: do layout

First, remove the baseboards and door jambs. Then draw lines marking. Ideally, you should have a plan on paper, which should be transferred to the floor.

Step Three: Prepare the adhesive solution

There are two options - buy the finished adhesive mixture or else the purchase and production of the solution on their own. How to prepare a solution writing on the packaging manufacturer, so there is nothing complicated about it. The main thing - remember the glue dries up pretty quickly. So, try to calculate precisely the amount of solution that you will use.

Step Four: laid tile

Using a spatula, observing strict angle, apply glue to the floor and align it to the layer was completely on the same level. At the same time, remember that the thickness of the solution layer can not be larger than the thickness of the tiles.

So, carefully lay the first tile series, corner of the room is not affected, because most likely the extreme tiles will require pruning, but we will deal with it towards the end of the positioning.

Step Five: align the tiles

In time of how you will check the degree of flatness of the tiles, remember that there is a distance between the tiles, which are always the same. To use this level during installation and plastic cartons or crosses.

Step Six: overwrites the seams

Thus, once the tile is laid, during the day it is not necessary to touch. Once this time has passed, you can begin to grout. For this purpose the dry trowel mix, sold in specialty stores building. To apply grout, use a rubber spatula.

By the way, note that the grout should have time to wash away the time, otherwise it tightly cleave to the tile so that it remove the excess immediately after the finished grout.

And finally, a little advice - be patient about ten days, do not check your new flooring for durability. Let them dry completely and acclimatise. And, of course, congratulations on the invaluable experience of tiling.