How to put a tile on the wooden floor

To lay tiles on a wooden floor, you must make sure that the floor is hard, flat surface. If it is not smooth, it is necessary to make the substrate that will help smooth the surface.

You will need

Particleboard;

screws;

level;

grid;

brush;

latex;

liquid glass;

water;

sand.

Instructions
1. Prepare the floor. Remove completely paint and varnish. Deal with it. Mounting foam waterproofing joints between wall and chipboard.
2. Deal with protective chipboard impregnated or heated linseed oil (be careful - it is flammable). If there are gaps in the floor embedded them with sealant.
3. Using a brush, a thick layer of latex treat EAF. Use as wide a brush.
4. Immediately after treatment lay on the surface of the masking grid and leave it to dry completely.
5. Once the grid is dry, attach it to the chipboard screws. Do not regret smaorezov, they need to make it fit to complete the grid.
6. Treat the surface with a mixture of the following: 2 parts water glass, 1 part water, 2 parts coarse sand. To the floor "did not walk" and not "crunched", and you can easily take it all the way to make a new concrete and screed.
7. When the composition is completely dry, apply the level and see if the floor has become flat. Then, the treated surface can be laid tiles.
8. Identify the place where you start laying tile, measure the angles, make markup.
9. Prepare a mixture of cement and mix it with the building compound. It will firmly stick to the surface of the tile. Thus, it is durable and resistant to breakage.
10. Apply a tile, depending on its pattern in neat rows. Between the seams, make the grout, remove the extra layer of cement. Do not wait until it dries, do it immediately.
11. If you are in doubt that they themselves can properly lay the tile, leave this to professionals, they know their job and do everything efficiently and in a shorter time.

pay attention
If the floor is not even, in the future may cause cracks on the tile.

Helpful advice
To not publish the floor squeaks, you must make it a high quality, without losing any important details. Make sure that when you steal tiles, the surface must be flat.