Installation of installations for toilet

Suspended toilet with the installation has become increasingly popular, and it should be noted that you can install yourself hanging toilet. But the installation of installations for toilet - a process that most people prefer to entrust to specialists. However, nothing complicated in this process is not, install the toilet installation is possible by hand.

Installation Installation is a simple process, most importantly, to stock up on the necessary tools and knowledge on how to install.

How to choose an installation?
When selecting the toilet, it should be noted that toilets from different manufacturers differ in surface smoothness and shape of the bowl.

But by installing a suspended toilet depend largely on all the problems with the toilet, so you need to choose it carefully. It should be borne in mind that both the frame and the tank, and all other communication will be hidden, respectively, to reach them will be difficult. Selection of installation depends largely on taste preferences, but only need to buy it from a reputable manufacturer. This is exactly the situation in which the overpayment for the brand pays for itself many times.

In most cases, you should choose a frame and not block the installation.

Install installation of the toilet can be suspended under the following instruments:

The ability to repair the toilet and installation easier if the buttons at the bottom of the drain to make a maintenance hatch.
Adjustable wrenches, they are necessary in order to mount the installation to the wall or to the floor. In the kit, there is usually a hardware - screws with heads under the keys.
The level frame is put into the installation is on the level - both vertically and horizontally. If the level does not take advantage of the mount is easy to miss.
Roulette, which is necessary in order to strengthen the installation, with the top of the toilet should be at a height of not more than 45 cm from the floor. It should be borne in mind that when a tile is placed, the floor is always slightly raised. We need more skilled hands and attentiveness.

It is at this stage is recommended to check the complete set of installation and toilet. It should at the same time make sure that it includes hardware, as may have to acquire an anchor. Some manufacturers do not put a gasket kit damper, which is installed between the wall and the toilet bowl, but it can easily be replaced by a layer of silicone.
Back to contents
Setting installation toilet with his hands - the instruction for beginners

Many people are concerned about how to install the installation by hand. Installation should begin with his own hands before the laid tiles on the floor and on the walls:

An exemplary diagram of the setup installation of the toilet.
It is necessary to mark the holes for the frame, we must not forget about the distance from the floor, and that the need to use a level.
It should Drill holes, then place planted on plugs and mounted on the frame of the place, it can be fixed with anchor bolts, which is a more reliable option.
Connections to the water supply tank, in most cases the tanks are connected to the water bottom and side. The tank is connected to the water pipe exclusively used in this corrugation is not necessary.
Now, the installation must be connected to the sewer pipe. In most cases it is possible to use a pipe whose diameter does not exceed 90 mm and 110 additional adapter is not necessary. Well, if the toilet is with a hole in the standpipe, in this case the sewer pipe, which leads from it will not be overgrown with fat dishes that the kitchen sewage inevitable. If the holes do not coincide, it is possible to use a corrugation, but this is undesirable since it is not as strong and durable as a pipe.
Thereafter, the installation can sew, as the material can be used for this moisture resistant plasterboard sheet having a thickness not exceeding 10 mm. This sheet is best not to mount to the frame, as the metal is too thick, and was put on the edge of a profile made of plasterboard.
Installation continues laying tile, but before laying tiles on gypsum board, at the place of the future button drain specifically designed to put this collar and cap. The plug needs to be protected fittings of debris, the cuff should be cut when the knob is set, it is done right on the edge of the tile.
Installing the toilet installation should begin no earlier than ten days will be held after the tile is laid. It is necessary to accurately adjust the size of drain pipes toilets and sanitation. Make it easy with their hands, then you need to put in place the gasket between the tile and the toilet, and then the corresponding surface of the need to apply silicone. The toilet is mounted on studs and nuts are tightened. Then he drained the water and checked for leaks.
Installation proceeds so that it is necessary to install the flush button, in the event that it is connected to the valve pin tank plastic thread, before its cut, it is necessary to measure all carefully. In an ideal scenario, the flush button should have a little free entry, it must be pressed effortlessly.

Back to contents
Useful tips
If the button below the drain foresee a maintenance hatch, the repair and maintenance of the tank will be made much easier.
When selecting fittings, tank and drain the button, it is best to choose those that have a water-saving system. As a rule, these are two separate buttons for the use of all available water in a tank and a half of, but may still be a button "start / stop". So much water is spent economically.
When installing the toilet flush button installation must be placed in the center or tile, or on the seam between the tiles. The tile should be put in the direction of the button to the edges.

During installation should strictly follow the instructions, then there is no doubt that the result will be positive. It should be noted that the bidet is also possible to install their own hands, nothing complicated about it, as the mount bidet is no different from an ordinary mount toilet. It should also be borne in mind that bidet will look better if the wiring ducts are concealed into the wall. When connected to the sewage system, a bidet, a trial run should be made of water, and then check the operation of all equipment. Thus, the bidet installation complexity also is different.